| |
Joining Half Persian 4 in 1*
After searching everywhere for
a tutorial on how to join ends
on the HP 4-1 I decided to go
with the wise words, "If you want
something done, do it yourself".
This proved to be harder than
I thought, which why the rings
in the pics are so horribly scratched...but
I finally figured the darn thing
out, and now I share my experience
with you. ^_^
I should also mention that, even
with a step by step tutorial,
this takes patience and dexterity.
If you don't get it right away,
just keep trying, you'll get it
in time.
To start, complete each end,
and remove (or don't add) the
usual "loose" ring.
The green are all facing the
same direction, same with the
gold.
----
Line up the "green" rings and
weave a new "gold' ring
(in this case "red")
down through two
green on one side
and up through
one green on the other side.
----
Take a "green" ring
("purple"),
weave it up through
two gold on one side
and down through
a gold and the red on the other.
----
Take the first green ring on
the right (see pic),
bring it up through
one gold ring on the left.
Once you've done that last step,
it should look like this:
...and then you're done! ^_^
*if this tutorial confuses you, try this one:
Joining
Half Persian 4-1 by Theresa Olin (excellent pictures!)
|
Copyright ©2003 Armoured
Raven. All rights reserved.
|
|
|
|
